How to Replace lenses in a Plastic Full Rim Frame
Step 1: Removal
Flip the sunglasses around and press firmly on the nasal corner of the lens
Step 2: Line Up
Flip-over and hold the frame facing you then line up the edges of lenses with the frame
Step 3: Installation
Press your thumbs around the lens and snap it firmly into place
How to Replace lenses in a Metal Frame
Step 1: Loosen Frame
Locate the frame screws on the underside of the temple hinge. Loosen the screws, trying not to remove them, with a small Philips-head screwdriver. RECOMMENDATION: Start this process on a white surface so you can easily find screws if they fall out
Step 2: Removal
After the frame has loosened up you can easily remove the lenses
Step 3: Installation
Line up the lens into the groove of the lens socket and work the lens into the frame groove. Once the lens is in place, hold the frame closed and tighten the screws until the frame feels steady and secure
How to Replace lenses in a Plastic Half-Rim Frame
Step 1: Removal
Place your thumb under the bridge (nose) of the frame. With the other hand place your index finger on top of the frame, above the lens, and your thumb on the bottom of the lens. Push UP on the bridge and DOWN on the frame and lens
Step 2: Line Up
Locate the notches of the lens. Start with the outside notch and line up to the groove and notches of the frame
Step 3: Installation
Push UP on the nose side of your lens and pull DOWN on the frame until your hear a POP and ensure the lens is seated securely into your frame
How to Replace lenses in a Shield/Mask style Frame
Step 1: Positioning
Flip the sunglasses around and turn 90 degrees so the frame is vertical
Step 2: Removal
Gently pull out on each side of the frame and press firmly on the lens to push it through. Do this on both sides and press firmly on the nasal portion of the lens to completely pop the lens out of the frame.
Step 3: Installation
Flip-over and hold the frame facing you then line up the edges of lenses with the frame. Press your thumbs around the lens and snap it firmly into place