Enhance your lenses with a Personalized Custom Engraving! Find out more

18 Lens Color to Choose From Learn more



New eyewear is exciting, right? The frames are spotless and snug, giving the impression that they were always there. With these glasses, you won't be able to stop staring at the world around you. So why can't spectacles just remain like this? Here's a secret: there's no reason they can't, what with today's scratch-resistant lenses and titanium-strength frames. All you need is some insight and a few minutes to give your brand new eyeglasses some tender loving care. Here are four tried-and-true methods for maintaining your eyewear scratch-free and looking fresh.
The first of many interesting tidbits regarding cleaning rags:
When it comes to cleaning your lenses, a microfiber cloth is your best bet. One is usually included when you buy a new pair of glasses. But after you've misplaced that little towel, you're back to utilizing lint-producing paper towels and sweater sleeves. Using a paper towel or sweater to remove lint from your lenses is the same as using very fine sandpaper. One of the most common reasons for damaged lenses is cleaning them with a paper towel or sweatshirt. It's easier to maintain a regular cleaning routine if you have a supply of microfiber cloths at the ready in several locations, such as your house, vehicle, and place of business. If you don't have access to a microfiber cloth, you may use any soft fabric that won't shed lint to clean the lenses. Just be careful not to rub too hard. Finally, it's important to store your garments in a bag or case to prevent lint from being added to your clothes by dust or other particles. It's recommended that you rinse your lenses under water to remove any dust or debris, and that you dust off your cloths often.
2 - Hidden Advantage
Well, maybe it's not so top secret, but have you ever considered finally picking up some of that eyeglass cleaning you've been putting off? It plays a significant role in preserving the flawless clarity and scratch resistance of your lenses. The fact is, however, that not every disinfectant is created equal.
Check the label:
Avoid using any cleaning product that contains ammonia, alcohol, or both. Keep away from the sink's typical glass cleaners (such Windex or 409), as tempting as they may seem. Strong solvents like ammonia and alcohol might damage the integrity of your lenses' coatings, particularly anti-reflective ones. What you may not realize is that scratch-resistant does not imply indestructible.
Bonus Tip: Pre-moistened lens towelettes are a great time saver, but you should only use them sparingly and as a last option. Towelettes are not often recyclable because of the chemical additives that raise their price. Remember to rinse your lenses before cleaning them with a lens towelette, since dirt particles may leave behind tiny scratches.
Finally, a System
Using the microfiber cloth and lens cleaning solution, it is time to clean the lens. Apply the cleanser to the inside and outside of each lens first. Use a microfiber towel to remove any moisture. The lens may then be polished using the cloth's dry side. Make sure to do this every night before putting your glasses back in their case. While dirt and dust may be attracted to your lenses all day, the oil from your face and fingertips might transfer to your frames as well. Additionally, 4: Keep the Frame
Since you need to maintain your eyewear, you have a kit for fixing broken lenses. Right? If not, you may pick up a kit to fix your glasses at any local pharmacy or internet retailer. Absolutely, even the little screwdriver in a plastic tube attached to your keychain will do. In any case, it's best to invest in a genuine repair kit that comes with a human-sized optometric screwdriver and several spare screws. You should expect to pay $10 to $20 for a high-quality kit.
Once you have the necessary tools, schedule a maintenance check at some time during the week. Before starting any kind of repair, make sure you have a good grasp on the frame's general health. Screw the following tiny screws into the frame until they are snug:
The frame's hinge is located at the temple. Spread out a microfiber towel on a tabletop or other hard surface to act as a soft landing spot for your glasses. Because of this, you'll be able to apply force to the frame while twisting the optometric screwdriver.
The wire that holds the lens in place in the eyepiece's frame. Typically, you'll find this screw on the top, inside part of your frame. You should tighten the screw head by inverting the spectacles, with the frame braced on the same hard surface (with Microfiber cloth) as previously. If you want to avoid damaging the frame or stripping or breaking the screw, remember not to over-tighten or push too hard on the screw head.
An eyeglass repair kit is only suitable for minor fixes, despite the name. Don't attempt to repair your glasses on your own if you bend the frames or shatter the lenses. If you need help or repairs, you can always go to seekoptics.com and talk to the professionals there.
Similar to how breaking in a new pair of shoes might reveal painful pressure spots, the same is true for eyewear frames. When shopping for new eyewear, it's important to take into account each individual's facial shape, nose bridge, eye distance, and other factors. These elements may usually be adapted to fit within the existing framework.
Adjustable Focus Lenses:
Adjusting your bifocals, trifocals, progressives, occupational, or computer lenses correctly is essential for clear vision. If you're having trouble seeing clearly while wearing glasses, make sure they're adjusted properly.
Simply put, your eyesight is impaired, thus you need glasses. However, your eyesight will be compromised if your glasses don't rest comfortably on your face. In order for your prescription glasses to provide you with the clear, crisp vision they were designed to provide you, it is imperative that you get your frame adjusted properly.
The temples of your eyeglasses shouldn't be too broad or too tight on your head. Don't worry; your eye doctor can make the necessary adjustments to the glasses. The glasses are not correctly adjusted if they press against the side of your skull. They must not make contact with the skin in any way. Both the earlobes and the temples are good places to apply pressure.
Our ears, for example, are seldom symmetrical. The optician will modify your frames to correct the imbalance.
Indentions made by your spectacles on your nose indicate that the nose pads are not set up correctly. Another possible cause is having nasal pads that are too tiny. The size of the nose pad should match the dimensions of the lenses and the frame to provide a comfortable fit and equal distribution of weight over the nose bridge.
Lenses: The kind of lens you have fitted will determine how your lenses should be adjusted (Single vision or multifocal lens). Based on the size of the patient's face, the strength of their prescription, and how much of a range they're comfortable with, a custom focus point is calculated.
Helpful Advice from the Experts
You should always keep a spare pair of glasses on hand in case your current pair breaks. Get your damaged pair repaired at www.seekoptics.com while you wear your spare set of glasses.

Leave a comment

Please note: comments must be approved before they are published.

Select Lens and Purchase